PATENTED

For use in high impact areas suffering from belt and roller damage, spillage, and high maintenance.

Impact idlers do not support the belt correctly resulting in spillage, and frequent replacement.

Impact bars have a pre-determined strength which cannot be adjusted. The gaps between bars can become filled with damaging material, and need the whole bar replacing when the wear surface is worn out.

The IMPACT CUSHION is a unique product and combines the strength of steel , the low friction of U H M W Polyethylene and the impact absorbing qualities of rubber to gain the best blend of characteristics.

Two steel frames, topped with replaceable low-friction covers are formed to the trough angle of your belt, to give total belt support. Each frame is supported on rubber pivot bushes at the outer edge with a variable number of replaceable rubber cones supporting the centre. Only in this way can the deflection under load conditions be adjusted to ensure that the impact forces are properly absorbed.

The shape of the cones coupled with the rubber pivots give a unique differential spring effect which allows for rapid and relatively large deflections to absorb potential damage from small but sharp or high velocity objects and yet still give progressively stronger qualities for larger lump sizes.

Increased belt life, increased skirt life, reduced maintenance, reduced spillage, lower costs.